BMR Suite 9.6.1
\n Today we are pleased to be releasing a new version of our BMR Suite 9.6.1 for Windows & Linux (Intel) to production. The suite consists of ABMR, CBMR, CoBMR, NBMR, RBMR and TBMR. \n\n\n\n Each product is immediately available as a separate download from the Cristie Licensing portal download area. \n\n\n\n Common to all BMR products \n\n\n\n \n Added Broadcom NetXtreme-E drivers to recovery ISOs (Windows) \n\n\n\n Cristie VA service would sometimes fail to start during install (Windows) \n\n\n\n Incorrect partition sizes being created because of the presence of a Microsoft Shadow Copy Partition (Windows) \n\n\n\n You can now build WinPE11 recovery ISOs. These should be used in place of WinPE 10 ISOs (Windows) \n\n\n\n Recoveries now inform you when the system state is being recovered (Windows) \n\n\n\n Recovery environment now uses HTTPS instead of HTTP (Linux) \n\n\n\n Recovery environment is now built on Rocky Linux 9 (Linux) \n\n\n\n BMRCFG would fail when dattobd snapshots existed (Linux) \n\n\n\n Only locally attached disks are now recovered by default (Linux) \n\n\n\n Recovery log is now shown when booting the ISO in text mode (Linux) \n\n\n\n You now have the option to rename “Cristie-recovered-system” boot entry to original post recovery (Linux) \n\n\n\n UI enhancements to recovery ISO (Linux) \n\n\n\n DHCP is enabled on all NICs in recovery environment by default (Linux) \n\n\n\n Other minor bug fixes & enhancements \n \n\n\n\n ABMR \n\n\n\n \n\n\n\n \n No ABMR specific enhancements in this release \n \n\n\n\n CBMR \n\n\n\n \n\n\n\n \n Restores would sometimes fail to verify compressed backups \n\n\n\n Removed TSM API dependency for CBMR (Linux) \n \n\n\n\n CoBMR \n\n\n\n \n\n\n\n \n Recovery would sometimes fail when a target disk is ignored and the disk mapping fails to map the Windows disk (Windows) \n\n\n\n File-based restores would sometimes fail with authentication error \n\n\n\n Enhanced errors for Cohesity tenant restores if a system was registered to more than one tenant. \n \n\n\n\n NBMR \n\n\n\n \n\n\n\n \n No NBMR specific enhancements in this release \n \n\n\n\n \n\n\n\n RBMR \n\n\n\n \n\n\n\n \n Rubrik CDM service accounts are now supported \n\n\n\n Rubrik 9 is now supported \n\n\n\n Rubrik Security Cloud is now supported \n\n\n\n RBMR recoveries now unregister the recovery environment at the end of a recovery (Linux) \n \n\n\n\n TBMR \n\n\n\n \n\n\n\n \n Spectrum Protect 8.1.21 is now supported \n \n\n\n\n \n
BMR Suite 9.5.1
\n Today we are pleased to be releasing a new version of our BMR Suite 9.5.1 for Windows & Linux (Intel & PPC) to production. The suite consists of ABMR, CBMR, CoBMR, NBMR, RBMR and TBMR. \n\n\n\n Each product is immediately available as a separate download from the Cristie Licensing portal download area. \n\n\n\n Common to all BMR products \n\n\n\n \n Windows products will now scan your system for changes and report to the VA. High changes could be the result of ransomware. Configure the VA to alert you of these changes. \n\n\n\n 2008R2 restores would sometimes boot without DHCP if specified during recovery. \n\n\n\n EFI -> BIOS conversion would take place without informing the user in the restore wizard. \n\n\n\n Improved abort times during recovery process. \n\n\n\n Enhanced support for systems with an X: drive. \n\n\n\n MBR -> GPT conversion would fail if the system has BOOT & SYSTEM on the same partition. \n\n\n\n EFI -> MBR conversion would fail when recovering to a smaller target disk. \n\n\n\n BMRCFG speed enhancements. \n\n\n\n Recovery ISO would sometimes try to communicate on a NIC that was disabled. \n\n\n\n SELinux contexts could sometimes appear on files/dirs. \n\n\n\n Improved resolution in recovery environment for Linux. \n\n\n\n Custom Linux ISOs (Created through the VA) would sometimes revert to DHCP shortly after boot. \n\n\n\n Improved multipath support. \n\n\n\n Other minor bug fixes and improvements. \n \n\n\n\n ABMR \n\n\n\n \n\n\n\n \n DataDomain support. (Linux) \n \n\n\n\n CBMR \n\n\n\n \n\n\n\n \n CBMR application would fail to run with an expired rental license with a blank error message. (Windows) \n\n\n\n Mounting network shares through the CBMR automatic recovery wizard would sometimes fail. (Linux) \n \n\n\n\n CoBMR \n\n\n\n \n\n\n\n \n Multi factor authentication support for recovery. (Windows & Linux) \n\n\n\n CoBMR restores would sometimes sit at 100% without updating to finished status. (Linux) \n\n\n\n CoBMR restores would sometimes fail if the server was running in DOD mode. (Linux) \n \n\n\n\n NBMR \n\n\n\n \n\n\n\n \n NetWorker logs would not be copied once a recovery was complete. (Linux) \n\n\n\n DataDomain support. (Linux) \n \n\n\n\n \n\n\n\n RBMR \n\n\n\n \n\n\n\n \n RBMR is now available for Linux on Power. \n\n\n\n Uninstall would fail if the Rubrik client was uninstalled first. (Windows) \n\n\n\n RBMR recoveries would not inform the user if the restore process was queued. (Windows & Linux) \n\n\n\n The RBS service would sometimes be removed when creating an ISO with CRISP. (Windows) \n\n\n\n Improved btrfs support. (Linux) \n \n\n\n\n TBMR \n\n\n\n \n\n\n\n \n Upgraded TSM client in recovery environment to 8.1.17. (Linux) \n \n\n\n\n \n
BMR Suite 9.1 - AIX
Aujourd'hui, nous avons le plaisir de mettre en production une nouvelle version de notre BMR Suite 9.1 pour AIX. La suite comprend ABMR, CBMR, NBMR et TBMR.
Chaque produit est immédiatement disponible sous forme de téléchargement séparé à partir de la zone de téléchargement du portail Cristie Licensing.
BMR Suite 9.4.2
\n Today we are pleased to be releasing a new version of our BMR Suite 9.4.2 for Windows & Linux (Intel & PPC) to production. The suite consists of ABMR, CBMR, CoBMR, NBMR, RBMR and TBMR. \n\n\n\n Each product is immediately available as a separate download from the Cristie Licensing portal download area. \n\n\n\n Common to all BMR products \n\n\n\n Reiserfs has been removed from the recovery environment.(Linux) ISO’s have been upgrades to 7.9 base (PPC) Cisco VNIC adapters were assigned all numeric names in WinPE. This would break PeNetCfg (Windows) In some instances, PPC restores would fail with modprobe errors. (PPC) Other minor bug fixes and improvements. \n\n\n\n ABMR \n\n\n\n \n\n\n\n Added support for Avamar 19.7 \n\n\n\n CBMR \n\n\n\n \n\n\n\n Automatically excludes DropBox & OneDrive virtual folders from backups. (Windows) Enhanced CBMR restores from an SMB backup location to allow SMB options. (PPC) \n\n\n\n CoBMR \n\n\n\n \n\n\n\n Recoveries would sometimes fail when converting uEFI -> BIOS when the original GPT disk had more than 4 partitions. (Windows) CoBMR restores would sometimes fail with “No matching protection source”. (Linux) \n\n\n\n NBMR \n\n\n\n \n\n\n\n Added support for NetWorker 19.7 (Windows & Linux) \n\n\n\n \n\n\n\n RBMR \n\n\n\n \n\n\n\n RBMR recovery wizard would sometimes show snapshots not belonging to the selected host. (Windows) RBMR ISO will now pull the correct Rubrik CDM from the server prior to starting recovery operations. (Windows & Linux) RBMR recovery would sometimes fail if an SMB domain was not specified. (Windows) RBMR recovery would sometimes fail with “An internal programming error occurred”. (Windows) Restoring an RBMR config would not clean-up source registration on the server. (Linux) \n\n\n\n TBMR \n\n\n\n \n\n\n\n Added support for Spectrum Protect 8.1.15 \n\n\n\n Note: These BMR products are compatible with the Cristie VA 4.4 release and you will see an update now. \n\n\n\n \n
BMR Suite 9.4
\n Today we are pleased to be releasing a new version of our BMR Suite 9.4 for Windows & Linux to production. The suite consists of ABMR, CBMR, CoBMR, NBMR and TBMR. \n\n\n\n Each product is immediately available as a separate download from the Cristie Licensing portal download area. \n\n\n\n Common to all BMR products \n\n\n\n The online licensing option has been retired (Windows & Linux) The legacy Automated DR Answerfile Tool has been retired (Windows) A corrupt license file causes the run of xBMRCFG.exe to hang. A corrupt license file no longer causes the exe to hang. (Windows) During a DR sequence it is now possible to add multiple DNS servers to post-recovery networking. (Linux) The XBMR DR environment now requires a minimum of 6GB RAM to operate correctly. (Linux) The selection/de-selection of disks/volume groups/file systems during a DR sequence has been improved to better handle large quantities of such items. (Linux) Some files were left behind when uninstalling BMR products from a host. This is now fixed. (Linux) The ‘Show Logfiles’ option in Linux XBMR shows no files after a DR. This is now fixed (Linux) The gateway is now a mandatory field when configuring a static IP on the Post Recovery Network configuration screen. (Linux) Other minor bug fixes and improvements. \n\n\n\n ABMR \n\n\n\n \n\n\n\n A Windows Server 2016 recovery to a vSphere target where the SCSI Controller has been set to VMWare Paravirtual would fail to boot due to an ‘INACCESIBLE_BOOT_DEVICE’ error. This is now fixed. \n\n\n\n CBMR \n\n\n\n \n\n\n\n CBMR now excludes DropBox and OneDrive contents from a backup. Now supports VTD backups larger than 2TB. A backup to TSM fails with “Couldn’t open backup location SMERR_NO_SUCH_DEVICE”. This is now fixed. (Linux) \n\n\n\n CoBMR \n\n\n\n \n\n\n\n CoBMR now unregisters sources/targets from the server if the IP matches the current recovery environment. A recovery of a block-based backup fails if hostname in the DR environment is changed before recovery. This is now fixed. CoBMRCfg.exe hangs if ‘M-Files’ software is installed on the host. This is now fixed. The install of CoBMRCfg.exe fails on Win2008R2. This is now fixed. Cohesity Multi-tenancy recovery not working. This is now fixed. Restoring a registered source with no active protection job on the server throws you back to the CoBMR DR settings page without explanation. This is now fixed. The XBMR DR environment incorrectly refers to a ‘Cohesity VE server’ instead of ‘Cohesity DataProtect Server’. This is now fixed (Linux) An XBMR DR recovery would sometimes fail with “Failed to make machine bootable.”. This is now fixed (Linux) With XBMR during a DR sequence, the get config step throws up a Firefox warning. This is now fixed. (Linux) With XBMR during a DR sequence, failed jobs still show when filtering out backups with warnings. This is now fixed. (Linux) With XBMR during a DR sequence, using SSL verify checkbox causes previously entered fields to get reset. This is now fixed. (Linux) With XBMR during a DR sequence, a point in time recovery via the Cristie Virtual Appliance (VA) results in incorrect Epoch time conversion to milliseconds . This is now fixed. (Linux) Improved the clarity of any SSL error messages reported during an XBMR DR sequence. (Linux) \n\n\n\n NBMR \n\n\n\n \n\n\n\n NBMR installation log files did not show the reason for failure during a silent install. This is now fixed. NBMR 9.3.2 PE10 recovery of a 2019 EFI Dell EMC NetWorker™ client backup undertaken from the client, hangs on the Volume Layout screen. This is now fixed. \n\n\n\n TBMR \n\n\n\n \n\n\n\n TBMRCFG.exe hangs if run on Windows 10 with a bit-lockered O/S disk. This is now fixed During an XBMR DR sequence doesn’t show the date of a selected backup. This is now fixed (Linux) \n\n\n\n Note: These BMR products are compatible with the Cristie VA 4.3 release and you will see an update now. \n\n\n\n \n
